cPB-4325 - Diversified Technology cPB-4325 PICMG 2.16 Pentium III, serverworks LE-T chipset,...
Request Quote
For Price
- Part Number:
- cPB-4325
- Model Number:
- cPB-4325
- Make:
- DIVERSIFIED TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Diversified Technology cPB-4325 PICMG 2.16 Pentium III, serverworks LE-T chipset, PCI video, 2x Gbe Ethernet 1x fast Ethernet, Simple Type: CPU Board
Diversified Technology's cPB-4325 high-density, high-performance, hot swappable CompactPCITM processor blade, compliant with the PICMG 2.16 packet switched backplane (PSB) open standard and offers exceptional processing power, high availability and I/O expansion for carrier-grade telecom/Internet and other mission critical applications. The cPB-4325 comes with one or two low power, 933MHz Intel Pentium III processors with 512KB L2 caches installed for optimum performance in uniprocessing or symmetric multiprocessing systems in a single CompactPCI slot. The ServerWorks LE-T chipset, with 133MHz FSB, supports up to 1GB ECC SDRAM and either five slots @ 64-bit/66MHz or seven slots @ 64-bit/33MHz. Onboard are two 10/100/1000Mbits/sec Ethernet auto-negotiating controllers, one 10/100Mbits/sec Ethernet controller, optional Ultra DMA/33 IDE hard drive or CompactFlash disk, PS/2 keyboard/mouse interface, Universal Serial Bus (USB) and serial ports, floppy interface and a SVGA CRT controller. An optional mezzanine card provides dual 64-bit/66MHz PMC sites, dual Fibre Channel interfaces and bus-segment bridging at 33 or 66MHz for up to seven additional slots. Functioning as a System Master processor blade in a CompactPCI multiprocessing system, the cPB-4325 supports hosting of hot swap peripherals. Optionally, it may operate in a peripheral slot, where it receives power but does not communicate on the CompactPCI bus.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Optional Mezzanine I/O Expansion Card with Dual PMC and Dual Fibre Channel Interfaces and Backplane Bridge
- Optional Onboard 2.5" Ultra DMA/33 EIDE Drive or CompactFlash Drive Carrier
- PCI Video with 2 MB SDRAM
- ServerWorks LE-T Chipset with 133MHz FSB
- Single/Dual Intel® 933MHz Pentium® III Processor with 512KB L2 Cache
- Two Gigabit and One Fast Ethernet Interfaces
- Up to 1GB ECC SDRAM
Specifications
- Bus Interface: 133MHz Front Side Bus; 64-bit/33-66 MHz CompactPCI Bus interface. 3.3V or 5V V(I/O) CompactPCI signaling as host or peripheral processor. Supports mezzanine card with dual 64-bit/66MHz 3.3V PMC cards, dual Fiber Channel Interfaces and 64-bit/33MHz bridge
- CPU / Cache / Chipset: Single/Dual Intel Low Voltage Pentium III at 933MHz. 32KB internal L1 cache; 512KB 64-bit on-die L2 Cache. ServerWorks LE-T.
- Mechanical: 9.2” x 6.3” x 0.8” (233.35 mm x 160 mm x 20.32 mm.) 6U x 4HP. Conforms to PICMG 2.0 R3.0 (Core), 2.1 R2.0, (Hot Swap), 2.9 R1.0 (System Management) and 2.16, R1.0 (PSB) specifications
- Memory: One 168-pin right-angled socket for up to 1GB registered PC133 ECC 3.3V SDRAM
- Peripherals & I/O Interface: Optional 2.5" EIDE drive or CompactFlash carrier. PCI video with 2MB memory. Front panel & rear port push button reset. Reset, IDE, two user-defined, System Health and Hot Swap LEDs on front panel.
- Processor: Intel Pentium III
Applications
- None Available
Aliases
- None Available