DIVERSIFIED TECHNOLOGY Industrial Partner

SPC1000 - Diversified Technologies SPC1000 Pentium III,256MB SDRAM, video, Ethernet, EIDE, Flash...

larger image

Request Quote
For Price
Part Number:
SPC1000
Model Number:
SPC1000
Make:
DIVERSIFIED TECHNOLOGY
Lead Time:
Available
Qty In Stock:
Available

Diversified Technologies SPC1000 Pentium III,256MB SDRAM, video, Ethernet, EIDE, Flash disk, IPMI system monitor & H.110 CT Bus interface Simple Type: CPU Board

The single slot SPC1000 slave controller board uses the Intel low power Pentium III processor (BGA2) to 700MHz, 440BX chipset w/ 100MHz FSB and up to 256MB SDRAM. Onboard I/O includes video, 10/100BaseTX Ethernet, ATA/33 EIDE, floppy disk, and KB/Mouse/USB/ serial/parallel interfaces. With IPMI micro-controller and full hot-swap compliant, it excels in fault tolerant, multiple-processor applications.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 100MHz FSB
  • 32-bit / 33MHz PCI Bus
  • BGA2 Processor up to 700 MHz
  • Embedded Intel Pentium III
  • IDE2000 Flash Drive2 Floppy Ports and 1 Serial Port
  • Intel 440BX Chipset with
  • PCI 10/100 Base-TX Ethernet
  • PCI Video
  • Rear USB Port
  • System Monitor
  • Up to 256 MB of SDRAM

Specifications

    General
  • BIOS: DTI Enhanced Phoenix BIOS, Plug-n-Play compliant
  • Board Type: CompactPCI 6U
  • CACHE: 16KB L1, 256KB L2 integrated on-die
  • CACHE: In addition to the 16KB of primary (L1) cache, a 256KB secondary (L2) on-die cache is integrated into the Embedded Pentium III (BGA2) processor.
  • COMPACTPCI BUS: The SPC1000 is a slave board that uses Intel’s 21554 PCI Non-transparent bridge. This bridge allows communications between the host processor and the
  • I/O: All SPC1000 I/O connections are routed to the P3 connector for connection to DTI's rearpanel I/O board, the SPI100.
  • IDE2000 FLASH DRIVE: M-Systems IDE2000 Flash Hard Drive up to 160MB (future expansion up to 320MB) using rear panel I/O SPI100.
  • IPMI Microcontroller: The SPC1000 includes a field flash upgradeable microcontroller that complies with the IPMI standard. This Microcontroller monitors onboard CPU temperature and system temperature, critical voltages, and CPU fan RPS.
  • MEMORY: 1 bank of 72 bit (168 pin) DIMM, up to 256MB of SDRAM, with ECCSupport
  • MEMORY: The SPC1000 supports up to 256MB of system memory using one standard 168-pin PC-100 SDRAM DIMM. The BIOS automatically sizes and configures the memory for optimal performance.
  • PCI BUS SPEED: Host side 33MHz, 32 or 64 bits; Local side 33MHz, 32 bits
  • PCI ETHERNET: 10/100 BASE-T auto-negotiating; Intel 82559 Controller using rear panel I/O SPI100. Remote boot support.
  • PCI IDE: EIDE support, PIO modes 0 to 4, bootable CD-ROM using rear panel I/O SPI100
  • PCIVIDEO: C&T 69000 with 2MB Integrated Video Memory using rear panel I/O SPI100
  • PHYSICAL: 6U size board (160mm x 233.35mm), 4HP Support for rear-panel I/O connections using DTI's SPI100 rear-panel I/O module
  • PROCESSOR: INTEL Embedded Pentium III (BGA2) with support for 100MHz front side bus speeds.
  • Processor: Intel Pentium III
  • REALTIME CLOCK: Includes 256 bytes CMOS RAM with long life battery
  • USB: UHCI compatible host controller using rear panel I/O SPI100

 

Applications

  • None Available

Aliases

  • None Available